Image IMTL59105.1 User Manual download pdf (Page 8)

7. Set the console assembly on the Handrail (20). Be care-

ful to avoid pinching any of the wires. Hand tighten

five Screws (3) into the Handrail and the console assem-

bly.

Do not put Screws into the two indicated holes.

Start all five Screws, but do not tighten them yet.

Console Assembly

No Screws

5. While a second person holds the console assembly near

the Handrail (20) as shown, attach the ground wire to the

ndicated hole in the Handrail with a Silver Ground Screw

(94).

Hole

Ground

Wire

Console

Assembly

6. While a second person continues to hold the console as-

sembly, look underneath it and locate the Console Wire

Harness (78).

Connect the Console Wire Harness (78) to the Upright

Wire Harness (77).

Make sure to connect the connec-

tors properly (see the inset drawing). The connectors

should slide together easily and snap into place. If the

connectors do not slide together easily and snap into

place, turn one connector and then try again. IF THE

CONNECTORS ARE NOT CONNECTED PROPERLY,

THE CONSOLE MAY BE DAMAGED WHEN THE

POWER IS TURNED ON. Then, insert the Wire

Harnesses down into the Handrail (20).

Console

Assembly

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 29 30

No comments

Image IMTL59105.1 User Manual Page 8